LTC7810 Datasheet | Analog Devices

FEATURES n Wide VIN Range: 4.5V to 140V (150V Abs Max) n Wide Output Voltage Range: 1V ≤ VOUT ≤ 60V n Low Operating IQ: 16μA (48VIN to 12VOUT and 3.3VOUT) n Adjustable Gate Drive Level Up to 10V n Optional Spread Spectrum Operation n Very Low Dropout: 100% Duty Cycle Operation n Low IQ in Dropout: 78µA (One Channel On) n RSENSE or Inductor DCR Current Sensing n Out-of-Phase Controllers Reduce Required Input Capacitance and Power Supply Induced Noise n Phase-Lockable Frequency (75k Hz to 720k Hz) n Programmable Fixed Frequency (50k Hz to 750k Hz) n Selectable Continuous, Pulse-Skipping, or Low Ripple Burst Mode® Operation at Light Loads n Onboard LDO or External NMOS LDO for DRVCC n EXTVCC LDO Powers Drivers from VOUT n Programmable Input Overvoltage Lockout n 48-Lead (7mm × 7mm) e LQFP Package n AEC-Q100 in Progress APPLICATIONS n Automotive and Transportation n Industrial and Telemunications n Military/Avionics DESCRIPTION The LTC®7810 is a high performance dual step-down DC/ DC switching regulator controller that drives all N-channel synchronous power MOSFET stages that can operate from voltages up to 140V. A constant frequency current mode architecture allows a phase-lockable frequency of up to 720k Hz. The low no-load quiescent current extends operating run time in battery-powered systems. The LTC7810 features a precision 1V reference, enabling the output voltage to be programmed from 1V to 60V. The gate drive voltage for the LTC7810 can be programmed to 6V, 8V, or 10V to allow the use of logic-level or standard-threshold FETs and to maximize efficiency. The LTC7810 additionally features spread spectrum operation which significantly reduces the peak radiated and conducted noise on both the input and output supplies, making it easier to ply with electromagnetic interference (EMI) standards. All registered trademarks and trademarks are the property of their respective owners. TYPICAL APPLICATION High Efficiency Dual 12V/ 5V Output Step-Down Regulator with Spread...